Mini Brew Tank Works

EZ Seal Weld-Less Bulkhead

Rated 4.9 out of 5 stars
8 Reviews
0 Shipping Options Available

Frequently bought together

The EZ Seal Stainless Steel Weld-Less Bulkhead Fitting by Minibrew

Now you can have stainless steel threads on any tank within seconds. We are so confident in the EZ Seal we use them for the Racking Port and Yeast Dump/Fill Valve Threads on all our World Class Conical Fermenters, Mash Tuns, and Hot Liquor Tanks. The Stainless Steel grade is SS304.  The Gaskets are Food Grade Nitrile Buna-N material.  

The EZ Seal Weld-Less Bulkhead began as a need for our fermenters, and has found its way into Maple Syrup Production Lines, Healthcare Settings, State Game and Wildlife Projects, Food Grade Dairy Machines, Medical Devices, Distilleries, and So Many More!  

Now you can convert any Kettle into a Brew Kettle!  Makes adding any NPT threaded piece of Hardware or Accessory as EZ as 1, 2, 3!


  • Left Hand Threads - Will ensure the bulkhead stays tight even with increased pressure from liquid on the inside of the tank
  • Internal NPT Female Thread Sizes are 1/2", 3/4" and 1"
  • Easy to Install
  • Internal and External Threads Doubles the Attachment Capability
  • Easy to Remove for Cleaning - Use Adjustable Wrench
  • Food Grade Stainless Steel
  • Leak Free
  • Two FDA Approved Red Buna-N Gaskets or Two EPDM Industrial Strength Gaskets
  • Dodecagon Back Flange (12-Sided) on the 1/2" & 3/4" Sizes (See Photos)
  • Hex Back Flange (6-Sided) on the 1" Size (See Photos)

Install As Easy as 1-2-3:

  1. First Decide Where You Want to Locate the Threads.  
  2. We Recommend a Step Drill Bit.
    1. 1-1/8” diameter hole for the 1/2” EZ Seal
    2. 1-3/8” diameter hole for the 3/4” EZ Seal
    3. 1 5/8" diameter hole for the 1" EZ Seal 
  3. Install the Bolt with the Washer at the Base, Pushing it Through Your Hole From the Inside of the Tank. Place second gasket on the nut.
  4. Screw the Nut Counter Clockwise onto the Bolt.
  5. Commercial Grade Teflon Tape is Highly Recommended.  

Variety: not only does the bulk head come in multiple sizes to fit any accessory you might have but we also have the option for FDA approved food grade quality or industrial strength EPDA quality gaskets.

Easy Install: A Weldless Option to add threads to any tank in seconds but also easily remove them to clean your equipment hassle free.

Long Lasting: Stainless steel bulkheads are strong and damage resistant giving you a superior choice compared to other brass based options which can rust or corrode.

Multi-Functional: Inner and outer threads on our bulk head allow multiple attachment options.

MiniBrew™ offers one of the most extensive selection of fittings and gasket grades in the industry. Available in diameters from 1/2” to to 1”, every fitting is produced to exact specifications. Gaskets come in Food Grade and EPDM options. In addition, all of our SS304 seals have been tested. 

The new MiniBrew™ Heavy Duty 1" EZ Seal Weldless Bulkhead offers additional functionality as well as a more heavier duty shaft and flange.  

If You Need to Drill the Hole for the EZ Seal, See Our EZ Step Drill Bits Here 

8 reviews
  • RH
    Ryan H.
    Verified Buyer
    I recommend this product
    Rated 5 out of 5 stars
    2 months ago
    Great customer service

    Jeremy goes above and beyond for customers. Helped me solve shipping problems (post office fault) with great communication and information. Made a customer for life for all my hobby needs.

    Thank you Jeremy!

  • BM
    Billy M.
    I recommend this product
    Rated 5 out of 5 stars
    2 years ago
    Mounting to stainless steel

    I purchased all three sizes of bulkheads. They all work great provided the holes are cut just large enough for the part.

  • W
    I recommend this product
    Rated 5 out of 5 stars
    2 years ago
    1 inch Weldless Bulkhead (3x)

    This is my third purchase of the 1 inch weld less bulkhead. I have used them with low density water heater elements to heat water in a 6 gallon and now a 16 gallon pot. Unlike others I have not had to shorten the treads to accommodate the low density, double-back, elements. This is easiest and quickest way to convert a pot to electric. Mini Brew has been great to work with. Don’t go for the quick and cheap alternatives that will promise quick delivery. They will take weeks to come from China and you will not receive what you ordered. If it is the correct diameter it appears a six year old milled it. Stay with Mini Brew!

  • DL
    Daniel L.
    I recommend this product
    Rated 5 out of 5 stars
    3 years ago

    100% top quality and a great price as well

  • FS
    Frank S.
    I recommend this product
    Rated 4 out of 5 stars
    3 years ago
    Too long for foldback heating elements

    Be prepared to shorten the threaded nipple if you have a foldback heating element. I had to cut the nipple with a cutoff saw and install the fitting reverse of the intended design due to not having any threads on the internal bore on the unflanged end after cutting. It does the job and does not leak.

    You will need a 1-5/8" hole to install the fitting. This info. is not provided until after you purchase the fitting.

Reviews LoadedReviews Added