Sale Model 15 Gallon Hot Liquor Tank
This particular model received an extra port, near the bottom of the tank and to the right of the Thermometer. It is sometimes nice to have an extra port, but we did not feel it was a must-have on the Hot Liquor Tank. Therefore, it was removed in the latest model.
The other alteration made to the Hot Liquor Tank was to remove the Spin-Weld on the back of the tank, and replace it with a 1" EZ Seal Weld-Less Bulkhead. This port can also be used for anything else you may need besides being used for a heating element.
Once this model is gone, it will not be re-stocked or back inventory. Take advantage of a great tank at an even greater price!
Minibrew® Hot Liquor Tank 15
The Hot Liquor Tank 15 makes all grain brewing easier and much more fun. It is designed for mash water preparation and hot liquor storage.
We recommend you use it with our Minibrew® MiniMash Lauter Tun 15. Place the tank on a shelf above your MiniMash Lauter Tun so you can gravity feed to your mash operation. Use gravity once again, or a seal less magnetic drive polysulfone pump to move the hot water from the kettle or heating source to the Hot Liquor Tank 15. You can also recirculate the water through the mash until you have extracted all the sugars. A one inch thread is included.
For those who wish to add a heating element, you will need a temperature control unit to regulate the heating element. Some brewers may build their own heating control unit. Search the web for instructions. Put the temperature control at your finger tips.
The resistance to energy transfer is slightly greater than stainless steel. In other words, our plastic holds the heat longer than stainless steel.
We include with your purchase a 1/2” ball valve, 1 barb fittings for hosing, 1” heating element thread and plug, thermometer thread plug, sight glass and tank with lid. Gallon markings are on the side by the Teflon sight glass. One additional port, near the bottom is also provided. Thermometer is sold separately.
Our HDPE tanks will hold boiling water as the plastic melts at 240 degrees. The tank is 17 1/4 inches wide at the lid, the widest point and 22 1/4 inches from top to bottom.
This tank makes all grain brewing easy and fun!
Thermometer is sold separately.
NOTE: After completion of the sale, setup and instruction files will be sent via eMail. All files are .pdf format, and can be downloaded through the link provided. If you do not receive the eMail, kindly send an eMail through the Contact Us form on the website, and we'll get that sent to you.